Stiles, vertical members and rails, horizontal members are grooved along the inner edges of frame to receive the panels.These are the widely used doors in almost all types of buildings. These are very strong and will give good appearance when compared to battened doors.Types of Doors based on Method of Construction:īased on the method of construction, the doors are again classified into 5 types and they are: The braces are connected diagonally between the ledges, at about 40mm from the stiles.In this type, the door made up of battens, ledges, stiles and braces.Battened, Ledged, Braced and Framed Doors Stiles are generally 100mm wide and as far as thickness is concerned, the thickness of stile should be equal to the combined thickness of ledge and batten.For the simple battened and ledged door, frame work is provided in the form of two verticals, known as stiles.These type of doors can be used for wider openings.Braces should place upwards from handing side, then they acts as struts and take compression.Braces are having 100-150mm width and 25-30mm thickness are preferable.To make more rigid, braces are provided diagonally in additional to battens and ledges as shown in figure.This type of battened and ledged doors suitable for narrow openings.General dimension of ledges are 100-200mm width and 25-30mm thick.General Dimensions of batten are 100-150mm width and 20-30mm thick.Battens are vertical bonds which are having grooves are attached together by horizontal supports called ledges as shown in below figure. Types of Doors Used in Building Construction Types of Doors based on Placing of Componentsīased on the arrangement of door components, the doors are classified as following, Hollow core and cellular core flush door.Solid Core or Laminated Core Flush Door.Types of Doors Used in Building Construction.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |